Source Page - BenQ DLP User Manual

User's Manual
Auto To reset display, image and control settings to factory settings.
To select the OSD menu language. Eight languages are supported: English, French,
Language
German, Italian, Spanish, Korean, Simplified Chinese and Traditional Chinese. (See
Figure 27).
Mirror To select Normal projection, H-Invert projection, V-Invert projection, or H/V
Invert projection.
To set the time to turn the power off after the start up screen is displayed and no
Auto Off
signal is detected or sync is out of range. To select, use "3" (KEYSTONE-) or
"4" (KEYSTONE+) to set the time. 0 means Auto Off function inactive.
*Default setting is 0 (stop).
The usage time of lamp will display on this item. And you can reset the usage time
Lamp
of lamp from this item after you change a new lamp (See page 15).
D. Source Page
This Sub-page will only show up whenever AV box
is attached.
There are five items on this page: Source, Volume,
Treble, Bass, and Mute.
*The priority of input signal detection: (a.) PC (b.) S-
Video (c.) Video.
*When selecting input sources, the projector will
detect the selected input simultaneously, and the
OSD menu will still exist on the screen.
Items
3 input sources are available in the items when AV box is connected to the
Source
projector: PC, Video, S-video
Volume To set the volume level of speaker built in the AV box.
Treble
To set the treble level of speaker built in the AV box.
Bass
To set the bass level of speaker built in the AV box.
To turn on/off the mute function.
Mute
18 Operation
Setting effects
Figure 28 Source sub-page (AV box attached)
Description