Advertisement
RF Call Box Adapter Kit
for Kenwood 170 Series Portable Radio
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 190-3170K RF Call Box Adapter Kit for Kenwood Radio 3170 is intended for use with
GAI-Tronics Model CB193-003, CB194-003, and CB195-003 RF Call Boxes. This kit includes the
following components:
Qty
Description
1
Mounting bracket
1
Velcro strap
1
Battery eliminator with connector
1
Interface cable assembly
Screws #6-32 × 5/16 inch
2
2
Rubber bump-ons
1
Programming CD, Kenwood DAT files
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374
V
ISIT WWW
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 190-3170K
800-492-1212
.
-
.
GAI
TRONICS
COM FOR PRODUCT LITERATURE AND MANUALS
Fax: 610-796-5954
Pub. 43003-044B
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GAI-Tronics 190-3170K
Summary of Contents for GAI-Tronics 190-3170K
-
Page 1: General Information
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. General Information The Model 190-3170K RF Call Box Adapter Kit for Kenwood Radio 3170 is intended for use with GAI-Tronics Model CB193-003, CB194-003, and CB195-003 RF Call Boxes. This kit includes the following components:... -
Page 2: Wiring Connections
Pub. 43003-044B 2 of 4 190-3170K RF C 170 S Page: ODEL DAPTER IT FOR ENWOOD ERIES ORTABLE ADIO Installation Attaching the Mounting Bracket 1. Remove the four screws from the front of the enclosure using a Torx T-25 security bit. Open the front cover to the left and pull straight out until the hinge pins separate from the rear section. - Page 3 Pub. 43003-044B 3 of 4 190-3170K RF C 170 S Page: ODEL DAPTER IT FOR ENWOOD ERIES ORTABLE ADIO Figure 2. Models CB193-003, CB194-003, and CB195-003 \\s_eng\gtcproddocs\radio products-current release\43003\43003-044b\43003-044b.doc 02/07...
- Page 4 Pub. 43003-044B 4 of 4 190-3170K RF C 170 S Page: ODEL DAPTER IT FOR ENWOOD ERIES ORTABLE ADIO 6. Dress cables as shown in Figure 3 to avoid signal interference. Figure 3. Interior of the Call Box 7. Re-insert the front cover hinges into the rear section and close the cover, making certain to avoid pinching wires between the cover and rear section.
Need help?
Do you have a question about the 190-3170K and is the answer not in the manual?
Questions and answers