Panasonic Lumix DMC-FX9EB Operating Instructions Manual page 22

Table of Contents

Advertisement

[SETUP] menu (Refer to P21 for the setting method.)
[MONITOR]
Adjust the brightness of the LCD monitor in
7 steps.
• The setting on the brightness of the LCD
monitor also affects simple mode [
[AUTO REVIEW]
[OFF]:
The recorded picture does not
automatically appear.
[1SEC.]: The recorded picture
automatically appears on the
screen for about 1 second.
[3SEC.]: The recorded picture
automatically appears on the
screen for about 3 seconds.
[ZOOM]: The recorded picture
automatically appears on the
screen for about 1 second. Then
it is enlarged 4 times and appears
for about 1 second. This mode is
useful for confirming focus.
Pictures in auto bracket, burst
mode or pictures with audio are
not enlarged even if [ZOOM] is
selected.
• In motion picture mode [
function is not activated.
• When pictures are recorded in auto
bracket [
] (P43) or any speed ([
[
] and [
]) on burst mode (P45),
the auto review function is activated
regardless of the setting on the auto
review function. (The picture is not
enlarged.)
• The auto review function is activated while
pictures with audio are recorded
regardless of the setting on the auto review
function. (The picture is not enlarged.)
• The setting for the auto review function is
disabled in auto bracket, burst mode,
motion picture mode, [SELF PORTRAIT]
(P64) in scene mode, or when [AUDIO
REC.] is set to [ON].
22
VQT0S67
Preparation
[POWER SAVE]
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
].
[OFF]: The power save mode is not
• Press the shutter button halfway or turn
the camera off and on to cancel the power
save mode.
• When using the AC adaptor (DMW-AC5;
optional)/connecting to a PC or a printer/
recording motion pictures/playing back
motion pictures/during Slide Show, the
power save mode is not activated.
(However, during a manual Slide Show,
the setting for the power save mode is
fixed to [10MIN.].)
• The setting for power save mode is fixed
to [2MIN.] during the following.
– When economy mode is set
– In simple mode [
], auto review
],
The power save mode is activated
(the camera is automatically turned
off to save the battery life) if the
camera has not been used for the
time selected on the setting.
activated.
]

Advertisement

Table of Contents
loading

Table of Contents