Setting Date/Time (Clock Set) - Panasonic Lumix DMC-FX9EB Operating Instructions Manual

Setting Date/Time (Clock Set)

∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
PLEASE SET THE CLOCK
CLOCK SET
• When pressing the [MENU] button, the
screen shown in step 1 appears.
• The screen disappears after about
5 seconds. Turn the camera on again or
press the [MENU] button, select [CLOCK
SET] in page 2/3 of the [SETUP] menu
(P21) and set the clock in steps 1 and 2.
1 Set date and time.
CLOCK SET
00 00 : 11 JAN 2005
.
D/M/Y
SELECT SET
• 2/1: Select the desired item.
• 3/4: Set date and time.
20
VQT0S67
Preparation
2 Select [D/M/Y], [M/D/Y] or [Y/M/D].
MENU
• When a fully charged battery has been
.
EXIT
MENU
• You can set the year from 2000 to 2099.
• When you use a photo printing service, if
• For the date print setting, refer to P84.
CLOCK SET
10:00111.DEC.2005
D/M/Y
SELECT SET
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing time may be
shorter if the battery is not charged
sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again.
The 24-hour system is used.
the date is not set in the camera, it will not
be printed, even if the store provides a
date printing option to your photo.
EXIT
MENU