Bellini Crib Assembly Instructions Manual page 3

DO NOT
WINDOW WHERE CORDS FROM BLINDS
OR DRAPES MAY STRANGLE A CHILD.
IF REFINISHING, USE A NON-TOXIC FINISH
SPECIFIED FOR CHILDREN'S PRODUCTS
(LEAD-FREE).
DO NOT
WITH THIS CRIB.
REPLACE TEETHING RAIL(S) IF DAMAGED
OR LOOSE.
DO NOT
SIDE LOWERED. BE SURE SIDE IS RAISED
AND LOCKED IN POSITION WHENEVER
CHILD IS IN CRIB.
WHEN CHILD IS ABLE TO PULL TO
STANDING POSITION, SET MATTRESS TO
LOWEST POSITION AND REMOVE BUMPER
PADS, LARGE TOYS AND OTHER OBJECTS
THAT COULD SERVE AS STEPS FOR
CLIMBING OUT.
THE DIMENSION FROM THE TOP OF THE
MATTRESS TO THE TOP OF THE SIDE,
WHEN THE SIDE IS IN ITS LOWEST
POSITION SHOULD BE A MINIMUM OF 3
INCHES. THIS CAN BE OBTAINED BY
LOWERING THE MATTRESS SUPPORT TO
PLACE
USE A WATER MATTRESS
LEAVE CHILD IN CRIB WITH
3
CRIB NEAR