Bionaire BT38 Instruction Leaflet

BT38LA06ESM1.qxd 7/25/06 11:09 Page 1
FAN SAFETY
PLEASE READ AND SAVE
TOWER fan
THESE IMPORTANT
with 2 hour
SAFEGUARDS
timer
IMPORTANT INSTRUCTIONS
MODEL
When using electrical appliances, basic safety precautions
BT38 should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the instruction
manual.
3. To protect against electrical shock do not immerse
unit, plug or cord in water or spray with liquids. Plug
the appliance directly into electrical outlet.
4. Close supervision is necessary when any appliance is
used by or near children.
5. Unplug from outlet when not in use, when moving fan
from one location to another, before putting on or
taking off parts and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or
flammable fumes.
8. To avoid fire hazard, NEVER place the cord under
rugs or any parts near an open flame, cooking or
other heating appliance.
9. Do not operate any appliance with a damaged cord or
plug after the appliance malfunctions, or has been
dropped/damaged in any manner. Take it to an
Authorized Service Center for examination and/or repair.
10.The use of attachments not recommended or sold by
the appliance manufacturer may cause hazards.
11.Do not use outdoors.
12.Do not let the cord hang over the edge of a table,
counter or come in contact with hot surfaces or leave
exposed to high traffic areas.
13.To disconnect, grip plug and pull from wall outlet.
Never yank on cord.
14.Always use on a dry, level surface.
15.Do not operate fan until fully assembled with all parts
properly in place.
Read instructions before operating.
16.This product is intended for household use ONLY and
Retain for future reference.
not for commercial or industrial applications.
Instruction Leaflet
17.WARNING: To reduce the risk of electrical shock and
injury to persons, do not use in window.
18.WARNING: To reduce the risk of fire or electric
shock, DO NOT use this fan with any solid-state
speed control device.
PLEASE SAVE THESE OPERATING INSTRUCTIONS
Power Off:
INSTRUCTIONS
Select Speed = O, or, Select
Continuous Operation:
ASSEMBLY INSTRUCTIONS
1. Assemble Base Halves around the cord. Refer to Select = I
FIGURE 3.
and
2. Secure assembled base to the Fan Housing with two
Select Speed = III, II, I
thumb screws.
Timer Control:
3. Secure Power Cord as shown in FIGURE 4 & 5.
Select = Turns off in up to 120 minutes
and
FIGURE 1
Select Speed = III, II, I
E
Oscillation Control:
A. Front Grill
Press
B. Base Halves (2)
C. Thumb Screws (2)
FIGURE 2
A
D. Fan Housing
D
E. Control Panel
F. Power Cord H
G. Speed Control
H. Timer Control
I. Oscillation Control
F
Thumb Screw
FIGURE 3
B
C
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for
your Tower Fan. Please remember:
= O
• Always unplug the fan before cleaning.
• Clean the fan with a soft cloth moistened with a mild
soap solution.
• Do not allow water to drip on or into the fan motor
housing.
• Do not use any of the following as a cleaner: gasoline,
thinner, benzene.
• We also recommend the periodic cleaning of this fan
by lightly running a vacuum cleaner nozzle over the
fan grill to remove any dust or dirt that may have
accumulated inside or on the unit.
= Oscillation on, off
FAN STORAGE
In the off-season, it is important to keep your fan in a
G
safe, dry location.
• We recommend using the original (or appropriately
sized) box.
I • Please remember to protect the fan from dust or
moisture.
III
II
I
I
O
120 O
100 20
FIGURE 4
80 40
60
FIGURE 5
How To Obtain Warranty Service: Please see the
country specific warranty insert or contact your local
authorized distributor for Bionaire TM appliances.
PLEASE DO NOT RETURN THIS PRODUCT TO THE
PLACE OF PURCHASE
© 2006 JCS/THG, LLC
Bionaire™ and the Bionaire logo™ are trademarks of
JCS/THG, LLC.
Printed in China