Ccd - "Awb/ Iso/Dbp - Kodak EasyShare C643 Service Manual

SERVICE MANUAL

CCD - "AWB/ ISO/DBP"

Adjustment Specification
Important
Do not use the CAMERA DOCK in this procedure.
Purpose: To set the values for Automatic White Balance, ISO, and ID of the CAMERA.
Do When: After installing a new MCU BOARD/LENS AY.
Specification: The failure message does not display.
Special Tools: • Computer with a MEMORY CARD READER/WRITER
• BATTERY
• LIGHT BOX
• SD/MMC MEMORY CARDS
Prerequisites:
[1] Do MASTER CAMERA - "Calibration of the MASTER CAMERA" on Page
To Check:
You cannot check this adjustment.
To Adjust:
Important
• The C643 CAMERA and MEMORY CARDS are used for the examples in this procedure.
• The procedure can be used for:
– C643 CAMERA
– C603 CAMERA
• You will need the files made from the procedure
Page 38.
[1] Do "Preparing the "C643_C603 AWB_ISO_DBP" MEMORY CARD" on Page
[2] Make a copy of the following files from the "C643_C603 Master Camera" MEMORY CARD:
• "BIG_LAMP.fig"
• "BoxID_ref.fig"
• "CameraID_ref.fig"
• "K_RESULT.txt"
• "CamerID_ref.fig"
• "Small_LAMP.fig"
[3] Place these 6 files in the folder "Batch" on the "C643_C603 AWB_ISO_DBP" MEMORY CARD.
[4] Insert:
• new BATTERY with a full charge into a C643 CAMERA
• "C643_C603 AWB_ISO_DBP" MEMORY CARD into the CAMERA
[5] Set the LIGHT BOX to:
• LV10
• color temperature 5800 K
40
MASTER CAMERA - "Calibration of the MASTER CAMERA" on
38.
65.
19JUN06 – SM1399-1