Unit Switch Between Fahrenheit And Celsius; Mode Functions - Radiant Innovation TempFairy TN1 Instruction Manual

UNIT SWITCH / MODE FUNCTION

Unit Switch between Fahrenheit and Celsius

To change the Unit from Celsius( °C) to Fahrenheit( °F): When the thermometer is ON
and unit °C , press the "Mode" key several times to switch to the mode while "°C " is
flashy, then press the "Meas." key to confirm the unit °F. Use the same process to
change the LCD display from °F to °C.

Mode Functions

TN1 series thermometer provides 3 modes for scanning the minimum or maximum
temperature of the certain object. It also has a "LOCK" mode for long-term operation of
the thermometer.
Using Minimum/Maximum/Lock Function
Power on the thermometer. Use a pin stick to press the "Mode" key several times until
the "MIN" starts flashing on the LCD. Then press the "Meas." key to confirm the
minimum mode. When taking temperature at minimum mode, the display will always
show the minimum value of the measurements.
Depress the mode key again to disable the certain mode.
The same procedures will switch the thermometer into the maximum "MAX" mode. In
contrary to the minimum mode, the thermometer will pick up and display the
maximum temperature of the measuring.
6
Radiant Innovation