Page 1
CCG180L BATTERIES AND CHARGERS SOLD SEPARATELY Your caulking gun has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
TABLE OF CONTENTS n Introduction ..................................2 n General Safety Rules ..............................3-4 n Specific Safety Rules............................... 4 n Safety Rules for Charger ..............................5 n Symbols..................................6-7 n Features..................................8-9 n Assembly ..................................9 n Operation.................................. 10-13 n Maintenance .................................. 14 n Service...................................
When battery pack is not in use, keep it away from MODEL BATTERY PACK CHARGER other metal objects like: paper clips, coins, keys, nails, CCG180L ABP1801/1802 ACR1800 screws or other small metal objects that can make n Do not abuse the cord. Never use the cord to carry the a connection from one terminal to another.
GENERAL SAFETY RULES SERVICE n When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section n Tool service must be performed only by qualified re- of this manual. Use of unauthorised parts or failure to fol- pair personnel.
SAFETY RULES FOR CHARGER n An extension cord should not be used unless WARNING! absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If READ AND UNDERSTAND ALL INSTRUCTIONS. extension cord must be used, make sure: Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz...
Page 7
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
FEATURES KNOW YOUR CAULKING GUN VARIABLE SPEED SELECTOR See Figure 1. The plunger speed can be adjusted with the variable speed selector. This allows you to adjust the material feed rate to Before attempting to use this product, familiarize yourself suit your particular application.
NOTE: If the charger does not charge the battery packunder CAUTION: normal circumstances, return both the battery pack and charger to your nearest Ryobi Authorised Service Centre If at any point during the charging process none of the forelectrical check.
Page 11
LED. After 30 minutes, reinsert the battery pack in the charger. If the green LED continues DEPRESS LATCHES TO to remain on, return battery pack to your nearest Ryobi RELEASE BATTERY PACK Authorised Service Centre for checking or replacing.
Page 12
OPERATION STARTING/STOPPING THE CAULKING GUN See Figure 5. Before attempting to start the caulking gun, be sure the switch lock is in the unlocked position. n To turn the caulking gun ON, depress the switch trigger. n To turn the caulking gun OFF, release the switch trigger. TURN OFF LOCK LOCKING THE SWITCH TRIGGER...
Page 13
OPERATION WARNING: LOW SPEED Battery tools are always in operating condition. Therefore, switch should always be locked when not in use or car- rying at your side. APPLYING CAULK See Figures 8 - 10. n Prepare the surface to be caulked by removing any dust, dirt or remnants of old caulking.
Only the parts shown on the parts list are intended to be GENERAL MAINTENANCE repaired or replaced by the customer. All other parts should be replaced at a Ryobi Authorised Service Centre. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 27 Clemow Drive, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.