Panel Facilities And Specifications; Control Center (Htv-C1) - Pioneer HTV-SW1 Service Manual

HTV-SW1, HTV-C1

8. PANEL FACILITIES AND SPECIFICATIONS

CONTROL CENTER (HTV-C1)

3
1 2
STANDBY/ON
SURROUND MODE
1
STANDBY/ON switch
Turns the power ON/OFF (Standby).
2 STANDBY indicator
Auto Standby function
This unit features a function that automatically switches power
ON or OFF (Standby) depending on whether a signal is input or
not.
÷ When power is switched ON, if there is no input signal for 5
minutes, the unit automatically switches to Standby and the
standby indicator lights orange.
÷ If a signal is input through the selected input jack when the
indicator is lit orange (showing that the Auto Standby function
is operating), power automatically switches ON.
÷ If you switch power OFF with the Standby switch in the main
unit or the remote control (the Standby indicator lights red),
the unit remains in the Standby mode even if a signal is input
through the selected input jack.
÷ When power to the unit is ON, the indicator lights green.
3 SURROUND MODE button
Selects Surround Mode.
4 DISPLAY button
When pressed once, displays each setting in sequence for 2
seconds. When pressed again, switches to Dimmer Mode, chang-
ing the brightness of the display.
5 VOLUME+, – buttons
50
SURROUND MODE
INPUT 12 INPUT 12 ST.WIDE ST.WIDE VIRTUAL DOLBY AUTO POWER ON AUTO POWER ON
STANDBY/ON
7 8 9
INPUT 12 ST.WIDE DOLBY VIRTUAL
VOLUME
DISPLAY INPUT
0 - 4
ON
DISPLAY
6 INPUT button
Selects the input device.
7 INPUT 1, 2 indicator
When the INPUT 1 terminal is selected, "1" is illuminated; when
the INPUT 2 terminal is selected, "2" is illuminated.
8 ST.WIDE indicator
Lights up when Surround Mode is switched to "STEREO WIDE."
9 DOLBY VIRTUAL indicator
Lights up when Surround Mode is switched to "DOLBY VIRTUAL."
0 Power ON indicator
This lights when the Control Center standby switch is set to On.
The indicator remains lit even if you switch the display OFF.
- Character display
5 6
VOLUME
INPUT