Table of Contents
Advertisement
Meta RPMs
srvadmin-server-cli
srvadmin-storageservices-snmp
srvadmin-storageservices-cli
Related Links:
Linux Installer Packages
Custom RPMs Based Installation
The following is an example of custom RPMs-based installation of Server Administrator, including the
installation of the Remote Enablement feature and the Storage Management Service components.
NOTE: On the Red Hat Enterprise Linux 5.x operating system, DVDs are automounted with the -
noexec mount option. This option does not allow you to run any executable from the DVD. You
have to manually mount the DVD and then run executables.
1.
Log in as root to the system running the supported operating system where you want to install the
managed system components.
2.
Insert the Systems Management Tools and Documentation DVD into the DVD drive.
3.
Navigate to the operating system specific directory corresponding to the system.
4.
Type the following command:
rpm –ivh Server-Instrumentation/<arch>/*.rpm
add-StorageManagement/<arch>/*.rpm
RemoteEnablement/<arch>/*.rpm
Server Administrator services do not start automatically.
NOTE: Ensure that you install Server Instrumentation or Remote Enablement before installing
Remote Access Controller or Storage Management.
NOTE: If you choose to install the Remote Enablement feature, ensure that you install the
dependent RPMs before installing this feature.
5.
Start the Server Administrator services after the installation by using the command:
sh srvadmin-services start
NOTE: You can install Server Administrator on any system that meets operating system
dependencies. However, after installation, certain Server Administrator services may not be
started on unsupported systems.
NOTE: When Server Administrator is installed on a system, dependency issues related to RPMs
may occur. To resolve these issues, install the missing RPMs from SYSMGMT/srvadmin/linux/
RPMS/supportRPMS/opensourcecomponents. If the RPMs are not available in this directory,
install these RPMs from the operating system media. If not available on the media, search for
these RPMs on the Internet.
Related Links:
Dependent RPMs for Remote Enablement
Using The Shell Script To Perform The Custom Installation
You can run the Server Administrator Custom Install script in an interactive mode.
The basic usage of the script is:
srvadmin-install.sh [OPTION]...
Details
Installs the server Command Line Interface (CLI)
component.
Installs the storage SNMP component.
Installs the storage CLI component.
31
Advertisement
Table of Contents
