Remote Controller; Connection; To Tv Or Monitor; To Tv Or Monitor And External Av Device - Samsung SVP-5300 User Manual

NAME AND FUNCTION
OF PART

Remote Controller

Focus F/N button
Used to focus the image displayed on the
video presenter manally
AF button
Used to focus the image displayed on the
video presenter automatically
Reverse button
Used to put the image into reverse up/down
or right/left
Freeze button
Used to freeze the image on the screen
SHARP + button
Used to see the image sharper
SHARP - button
Used to see the image duller
Preset button
Used to save the current status (Zoom,
Focus, Lamp, Color etc).
When you use the video presenter on
another place, you need not to repeat
the same procedures but the saved
status will be automatically set only
by pressing the "Active" button.
Select the button (1~4) and press it
10
within 4 seconds after pressing
"Save/Active" button.
INT/EXT button
Used to select internal Image or external Image
Internal (INT): To see the image on this presenter
External (EXT): To see the image sent from another AV
equipment through monitor (if connected to this
presenter)
POSI/NEGA button
Positive (POSI): To see the general state or positive film
Negative (NEGA): To see the negative film
Lamp button
Used to turn the head lamp on and off
Power button
Used to turn power on
and off
Volume +/- button
Used to increase or decrease the
volume of microphone
AWC button
Used to adjust the screen color (white
balance) automatically
RED+/-button and BLUE +/-button
Used to increase the red or blue color
factor
WIDE button
Used to reduce the image size of an object
TELE button
Used to enlarge the image size of an object
BRIGHT + button
Used to make the screen brighter
BRIGHT - button
Used to make the screen darker

CONNECTION

To TV or Monitor

TV, Monitor,
LCD Projector
to video input terminal
You may use either 'Video OUT 1' or 'Video OUT 2' jack.
Connect 'S-video OUT' terminal when you have a TV with S-Video terminal. If 'S-Video OUT' terminal is
used, you can get more clear image, but the signal from external AV source will not be available.
Connect 'RF output terminal' to TV with only RF terminal.

To TV or Monitor and External AV Device

to audio
input
terminal
TV, Monitor,
Yellow
LCD Projector
Video Presenter
Yellow
to video
input
terminal
Use the white plug to connect audio
terminal, and the yellow (or red) plug
to connect video terminal.
S-VIDEO OUT
VIDEO
IN
1
2
OUT
1 2
Video Presenter
White
to video
output
terminal
S-VIDEO OUT
POWER IN
DC12V IN
VIDEO AUDIO
IN IN
1
2 1 2
AV Device (VTR, Camcorder)
OUT OUT
1
1 2 2
White
Yellow
POWER IN
DC12V IN
AUDIO
IN
1 2
OUT
1
2
to audio
output
terminal
11