Table of Contents
Advertisement
9. Original Viewer –
Screen Configuration
1
[1Ch], [2Ch] Select channel and it will playback (V300HD only 1Ch support)
2
[Print] Print current pause screen.
3
[Jpeg] Save current pause screen.
4
Select saved location of current screen image.
5
[Config] Set operation environment for black box.
6
[Zoom] After pausing the image, select an area to expand with the mouse and check the image.
7
[―] Click, play program will be minimized to the position of a task pad.
[X] Click, the play program will be closed.
8
[Map] Click, GPS information will be recorded with the image and the drive location will be shown on the
map, When connected to GPS module.
1
2
3
1
2
1
5
4
5
6
1
1
1
3
1
6
9
[Find] Click, to select the image to playback.
10
[Normal], [Motion], [Event] Recording list, for each recording mode.
11
Window to playback the video. If you double-click during playback, a new window will pop up
and the screen can be expanded.
12
Control the video. (Pause / Previous File / Play or Pause / 1 Frame Playback / Next File)
13
Identify the current playback location of recorded images
14
Adjust the sound volume during playback.
15
[G-sensor] Display information on the shock sensor detected on car during driving or parking
16
Display GPS information (speed, latitude / longitude location information)
7
8
9
1
0
1
4
Advertisement
Table of Contents
