Table of Contents
Advertisement
5. How to record
1. Recording: V300HD is automatically booted at power on, and recording starts in basic normal recording mode.
2. Recording Mode: it is classified into driving recording mode and parking (motion) recording mode
3. Recording Method: it is classified into normal recording, event recording, motion recording.
※ For automatic recording and manual recording methods, please refer the below table.
Recording
Recording
mode
method
Normal
Driving
recording
recording
Event
mode
recording
Motion
Parking
recording
(motion)
recording
mode
Event
recording
※ after change to parking recording mode by manual, if you want to change normal recording mode again, please press "REC" button for
3 seconds (during event recording, mode cannot be changed.)
※ Even if power is interrupted during event recording mode, 30 second can be recorded completely before power is off.
(Only if built-in battery is fully charged)
※ If event (G-sensor detection and manual recording by button control) occurs during motion recording mode,
After motion recording mode will be completed, the motion recording file will be changed into event recording files, and event recording
mode will start immediately.
Manual
recording
Auto recording
method
method
(button
control)
-
One short press
In G-sensor detect Shock
In G-Sensor is not
detected for more than 8
3 second long
minutes Automatic
press button
motion recording mode
change
One short press
In G-sensor detect Shock
Recording time
Set on configuration
-
30 / 60 / 120 sec
button
Each 15
second
recording
before and
after event or
motion
occurrence
button
Recording
folder
Normal
* For HD highest
Event
quality resolution
only,
each 15 second
recording before
Motion
and after event
or motion
occurrence
Event
Advertisement
Table of Contents
