Fitting Batteries; Display Features - Technika CECR-10 Owner's Handbook Manual

FITTING BATTERIES

BATTERY POWER
Your clock radio can be powered by mains via the AC adaptor or batteries (optional). Batteries
should always be fitted as a complete set of new batteries. Never mix old and new batteries.
Fitting or replacing batteries:
1. Pressing the catch on the battery compartment cover in the direction shown.
2. Whilst holding the catch across, lift the cover off the battery compartment.
3. Lay the ribbon across the battery compartment as shown (this will help when removing the
batteries at a later date).
4. Fit 4 x AA batteries into the positions shown, observing polarity.
5. Tuck the end of the ribbon into the battery compartment.
6. Re-fit the cover.

DISPLAY FEATURES

DISPLAY LAYOUT
a Sleep mode
b
FM radio mode
c
AUX in mode
d
SD card/USB mode
e
Alarm set indicator
f
Alarm mode - Bell
g
Alarm mode - FM radio
4
h Alarm mode - SD card
i
Alarm mode - USB
p
FM stereo
q
Low battery indicator
r
FM mode indicators
s
Numeric display