Specifications; Packing Contents - Audio Pro LV2 Owner's Manual

ENGLISH
FEATURES
- Built-in wireless receiver in each speaker
- Wireless full CD quality sound
- Wireless range up to 50 m, 100m in line of sight
- No interference or delays
- Works with both Mac and PC
- RF band: 2.4GHz
- Sample rate: 44.1 KHz
- Dedicated proprietary protocol
- USB 2.0 interface

PACKING CONTENTS

Dedicated left and right speaker.
Only right speaker is equipped with remote receiver.
To use remote, always aim at right speaker.
Left speaker Right speaker
1 x TX100 wireless transmitter
LED, blue for established wireless connection.
Red for no wireless connection or no transmission.
House Code switch
*Using the 3.5mm jack you can send wireless audio from units with
line/headphones output. (For example iPod, receiver, etc) TX100 will
need an aftermarket USB power supply in a setup using 3.5 mm jack.
Remote receiver on
Right speaker only
LED, blue for
established wireless
connection.
Red for no wireless
connection or no
transmission.
3.5mm stereo jack line in*

SPECIFICATIONS

Type:
Powered wireless loudspeaker system
with DSP,2 way bass reflex cabinet
Amplifier:
2 x 25W digital Class D,
left and right speaker
Tweeter: 1" soft dome
Woofer: 4.5"
Frequency range:
45 – 22.000Hz
Crossover frequency:
4000Hz (24dB/octave L/R)
Dimensions HxWxD:
210x145x180mm
Rear panel on speakers
To power supply
On/Off
Master
volume
Zone volume
2 x power cord and power supply
House Code switch
Remote
Mute