Related Manuals for nawras HBI-200
Summary of Contents for nawras HBI-200
- Page 1 Notes: Internet Username Password (Sealed Envelope) Home Broadband Modem login Password Home Broadband Indoor Modem Wi-Fi access password User Guide HBI-200 (Windows and Mac) Version 2.0...
-
Page 2: Table Of Contents
Index Product overview 1. Product overview Thank you for purchasing your Home Broadband Indoor Modem herein after referred to as Modem. It is a complete voice and 2. Getting to know your Modem data Modem with built-in Wi-Fi functionality allowing users to access internet wirelessly. -
Page 3: Getting To Know Your Modem
Interface Status Description The indicators indicate the signal strength of the WiMAX Getting to know your Modem network. When all the LEDs are on, it indicates that the Front view signal strength is at the highest level. WiMAX One after the other in order Software upgrade is under progress. - Page 4 Rear view Interface Description POWER The interface is used to connect to the power adapter. The interface is used to connect the telephone line. The interface is used to connect the Modem to the computer using an Ethernet cable. RESET Caution: See later instructions on reset use.
-
Page 5: Home Voice
Unpack your Modem Home Voice Note: Note:... - Page 6 Step 1 Step 3 Place Modem near a window and connect the power cable and then Connect the telephone to the input labeled TEL using telephone cable supplied. Once you hear the dial tone you can start to make connect to the power socket. After two minutes, check the LEDs (see your voice calls.
-
Page 7: Home Broadband And Voice (With A Wi-Fi Configuration)
Please follow steps 1 to 3 Step 4 Connect the Ethernet cable between your laptop and the LAN port on the Modem. Home Broadband and Voice (with a Wi-Fi Configuration) - Page 8 Step 5 Step 7 In order to start using Home Broadband internet service, please enter Internet account (PPPoE): your Username and password provided by Nawras as guided below. username@nawras.om subscription contract. http://192.168.1.1/ Step 6 Internet Account (PPPoE) Username Mabrook! Now you can surf the internet at your home.
- Page 9 Step 8 Step 9 Establish a Wi-Fi Connection: To disable Wi-Fi functionality: You can remove the Ethernet cable between your laptop and the Modem. If you wish to disable the Wi-Fi functionality and use the Broadband Now establish a wireless network connection between your laptop internet by directly connecting to the Modem using an Ethernet cable, and the Modem.
-
Page 10: Troubleshooting Guide
4. I am not able to browse the internet. Troubleshooting guide Indoor Modem HBI-200 1. The power LED indicator is not ON. 2. The Modem power light is not ON or the WiMAX signal LEDs are not stable. 5. I am not able to connect using Wi-Fi.