Advertisement
RMB4 Internal controller for the Beo4 remote control
The OneRemote RMB4 controller is a small microcomputer module, which is specifi-
cally made to be built in to a Bang & Olufsen Beo4 remote control.
The RMB4 controller captures the commands that were meant for operating a Bang &
Olufsen device. Before the commands are emitted from the Beo4, these commands are
converted, and therefore able to operate a non Bang & Olufsen device.
RMB4 controllers are dedicated controllers made for operating a specific product like
an Apple iPod docking station, a flat screen TV, a curtain controller etc.
The RMB4 controller makes the Beo4 able to operate a third part device, but it is still
able to operate any other Bang & Olufsen products.
If a Bang & Olufsen audiomaster are in the room, it can be used for the sound. Speakers connected to an
audiomaster is normally of a much better quality than the speakers in a TV.
Only a simple audio cable is needed between the TV and the audiomaster. See the option programming sec-
tion about AAUX mode on page 7.
4
Advertisement
