Placing A Telephone Call; Receiving A Telephone Call - Kenwood TK-840 Instruction Manual

.
Placing a Telephone Call
Note:
Telephone calls can be made only if that service is available and you have an
optional keypad-equipped microphone. Consult your dealer for details.
1 Select the desired system and group that you want to call by using the
SYSTEM switches and GROUP switches.
2 Hold down the PTT switch for a moment (1 second) to ensure a
connection.
3 Release the PTT switch and confirm that you hear a dial tone from the
repeater.
4 Dial by using the microphone keypad. After dialing, wait for a response
from the other party.
5 When the other party responds, press the PTT switch and start
speaking. For best results, hold the microphone 1 to 1.5 inches from
your mouth. Release the PTT switch to listen to the other party. Only
one person can speak at a time.
6 To end the call, press the # key.
.
Receiving a Telephone Call
1 Select the system and group by using the SYSTEM switches and
GROUP switches. If the Scan function has been programmed, switch
this function ON or OFF as required.
2 When you receive an incoming telephone call, you will hear a ringing
tone from the speaker.
3 Hold down the PTT switch to speak and release it to listen to the other
party.
4 To end the call, press the # key.
10