Soen TRANSIT User Manual page 4

CONNECT TO YOUR BLUETOOTH
Watch quick & easy setup videos for some of the most popular smartphones and tablets online at
www.SoenAudio.com
Scan the QR code for direct access to the setup videos online.
1 .
Switch TRANSIT 'ON'.
TRANSIT comes partially charged and ready to use right out of the box. Just switch it 'ON'. If the light is RED or
does not come 'ON' plug the TRANSIT in using the included USB cable and charger. No damage will occur to the
speaker or battery if used before full charge.
2 .
Press-and-hold the Option button '
light on the switch will begin flashing blue indicating TRANSIT is in Bluetooth
connect with your Bluetooth
®
pairing tone every 3 seconds.
3 .
On the phone or device you are connecting, access the Bluetooth
'Search' for devices. When "TRANSIT" appears in the device list, select it. If a passcode is required, enter "0000".
Once TRANSIT connects, it will beep twice and the blue flashing light will turn white. Time to Rock!
For additional Bluetooth setup help, review the instruction manual that came with the device you are trying to
®
connect.
NOTE: This is a one-time setup for each device you connect to TRANSIT. To pair TRANSIT with another device,
repeat the steps above. TRANSIT will remember up to 8 devices. After pairing more than 8 devices, the 1st device
will have to be paired with TRANSIT in order to connect with TRANSIT.
BLUETOOTH AUTO-RECONNECT
®
For your convenience, TRANSIT remembers the devices that it pairs with, and will attempt to reconnect (for 15
seconds) to the last connected device every time it is turned 'ON'. If your device is out of range or has its Bluetooth
feature turned 'OFF', TRANSIT will not be able to re-connect automatically. If the device goes out of range or loses
connection with TRANSIT, you can easily reconnect by pressing any button.
PLAY AUDIO USING THE 3 .5MM CABLE
Connect the included 3.5mm stereo cable to any audio output device, and plug it into TRANSIT's '3.5mm Audio
Input' jack.
NOTE: When the 3.5mm jack is plugged in Bluetooth
CHARGING & PLAY TIME
The TRANSIT long-life battery is charged with the
included wall charger using the provided USB to micro
USB cable.
ƒ An empty battery takes between 2 to 3 hours to
fully charge using the wall charger, and will last be-
tween 4 to 8 hours on a full charge (actual battery
playtime depends on volume level and playback
content).
ƒ Battery can be charged with the TRANSIT switched
ON or OFF.
On Apple iOS Devices: The battery level of TRANSIT
®
will be shown directly next to the battery level of your
iPad or iPhone .
® ®
NOTE: The battery is not user replaceable.
∞
' until TRANSIT begins emitting the Bluetooth
device. NOTE: while in Bluetooth
will be automatically turned off.
®
DEVICE
®
pairing tone. The LED
®
pairing mode and available to
®
pairing mode, TRANSIT will emit the Bluetooth
®
settings, turn Bluetooth
®
®
'ON', then 'Add' or
®
®
3