Roland VG-99 Workshop Manual page 6

Quick Tuner
The Quick Tuner function allows you to toggle the VG-99's tuner on and off
from the FC-300 by pressing the number pedal for the currently selected
patch. This is an easy and intuitive way to turn the tuner on and off with
the FC-300, and saves your control pedal assignments for other VG-99
functions.
The FC-300's number pedals.
To enable the Quick Tuner function:
Press SYSTEM.
1
Use the PAGE buttons to select Page 1 in the display, and then press
2
F5 (FC-300).
Use the F3 knob or button to select ON.
3
Press EXIT twice to return to the Play screen.
4
The Quick Tuner function is only available when the VG-99's Play
screen is displayed.
FC-300 CTL and EXP Pedal Switches
You can assign TUNER ON/OFF to the FC-300's onboard CTL pedals and/
or expression pedal switches. (An expression pedal switch is activated by
pressing down on the toe of one of the FC-300's built-in expression pedals.)
Additionally, you can assign TUNER ON/OFF to an FS-5U or FS-6 connected
to the FC-300's rear-panel CTL jacks (3,4/5,6/7,8).
The procedure for making these assignments is similar to that described
previously in "Assigning TUNER ON/OFF to CTL3 or CTL4. " To make an
assignment, simply choose the desired FC-300 target controller instead of
CTL3 or CTL4.
•
FC-300 EXP SW1 and FC-300 EXP SW2—
expression pedal switches.
•
FC-300 CTL1 and FC-300 CTL2—
CTL pedals.
•
FC-300 EXP3/CTL3 and FC-300 CTL4—
connected to the CTL 3,4 jack.
•
FC-300 EXP4/CTL5 and FC-300 CTL6—
connected to the CTL 5,6 jack.
•
FC-300 EXP5/CTL7 and FC-300 CTL8—
connected to the CTL 7,8 jack.
Each of the FC-300's rear-panel jacks CTL jacks is a dual-function jack
that allows for the connection of either one or two footswitches or an
expression pedal (such as the Roland EV-5). The functionality of each
jack is set in the FC-300's system parameters. To learn more about
using external footswitches and expression pedals with the FC-300, see
the FC-300 Owner's Manual.
The End
We hope you've found this workshop helpful. Keep an eye out for other
VG-99 Workshop booklets available for downloading at www.RolandUS.
com.
These represent the FC-300's
These represent the FC-300's onboard
These represent footswitches
These represent footswitches
These represent footswitches
6