Replacing Headlight Bulb - Panasonic MC-V5271 Operating Instructions Manual

To Remove
Pour enlever
Para quitar
Belt Cover
Couvercle de
la courroie
Cubierta de
la banda
Agitator Holder
Support de l'agitateur
Soporte de l'agitador
Motor Shaft
Arbre d'entraînement
du moteur
Eje del motor

Replacing Headlight Bulb

Slots
Fentes
Ranuras
Light Lens
Lentille de la
lampe
Lentes de luz
To Reinstall
Pour réinstaller
Para reinstalarse
Replacing Belt
Lift Agitator Up
Soulever l'agitateur
Unidad del agitador
Install
New Belt
Poser la
nouvelle
courroie
Instalación
de la correa
- 28 -
Pry up light lens at slots.
Remove old bulb from the socket by
pushing in while turning counter-
clockwise.
Replace bulb by pushing in while
turning clockwise.
Only use a bulb rated 130 V AC-15
Watts or less.
Replace light lens by snapping into
place.
Replace belt whenever a burning
rubber smell caused by excessive
slippage occurs.
Remove lower plate.
Lift rear belt cover and remove
agitator holder.
Remove agitator by carefully lifting
out.
Remove worn or broken belt.
Clean agitator.
Loop new belt (Panasonic Type UB8
only) around motor shaft and
agitator pulley; see illustration for
correct belt routing.