Associating The Wireless Access Point - NETGEAR CWGE111 User Manual

Associating the Wireless Access Point

When you click the Advanced Options button, you will see the CPE Setup screen:
Figure 1-6 CPE Setup Screen
To Associate the Access Point
1. Click the Advanced Option button.
1. On the CPE Setup screen, locate the Wireless Settings options.
2. In the SSID field, input the access point SSID (also called the network name).
3. Select the Authentication method. According to Access Point settings you are
associating to, you might need to choose a different Authentication setting.
4. Enter the Encryption Key if a Static WEP or WPA/WPA2-Personal is selected for
Authentication.
Additional options include 802.1x with dynamic WEP key and WPA/WPA2-Enterprise.
You do not need to use these settings unless instructed to do so by your ISP.
5. Click the Save button at the bottom of the screen.
Figure 1-7 Associate wireless access points
8 | Chapter 1: CWGE111 Initial Setup
CWGE111 802.11g WiFi Receiver User Manual