Qos - NETGEAR CWGE111 User Manual

CWGE111 802.11g WiFi Receiver User Manual

QoS

1. Target:
To choose whether it is an incoming (Source) or outgoing (Destination) traffic that should
be controlled by the service.
2. Service Port Range:
Enter a port or a range of ports that would like to be controlled by the service.
3. Protocol:
The Protocol for the above port(s). You should select at least one protocol between TCP
and UDP.
4. IP Address:
The IP address that you would like the traffic to be controlled by the service.
5. Priority:
There are three choices for service priority: Background, Video and Voice. By choosing
Default, priority will be automatically adjusted.
6. Del:
By clicking the Delete button, you can delete the corresponding rows of QoS rules.
Figure 2-12 QoS
Chapter 2: Advanced Configuration | 27