Soft Grip Handle - Hitachi CJ 90VST Technical And Service Manual

Tool-less blade changing system
The blade is easily replaceable because it can be attached
and detached without using such tools as a spanner and
wrench.
The blade can be attached and detached by simply pulling
the lever. Pulling the lever pushes back the holder pin (via a
built-in spring) that holds the blade in place. This allows the
blade to be easily attached and detached.
The only usable competitive blade is BOSCH's blade having
an attaching portion up to 1.7 mm thick or an equivalent
blade of the same shape.
4-stage orbital
The Model CJ 90VST is equipped with an orbital mechanism that allows the blade to move up and down,
and back and forward. This mechanism allows the blade to cut deeply into wood and other soft materials,
and also discharges cutting chips well to achieve speedy cutting. For details, see "Blade movement" on
page 6.

Soft grip handle

The handle of the Model CJ 90VST is completely covered with soft-touch elastomer (a rubber-like soft
resin). It is slip resistant and securely fits in into palm of even a sweaty hand.
Blower mechanism for blowing away cutting dust
The Model CJ 90VST is equipped with a dust blower mechanism that blows off cutting dust into the air from
the motor cooling fan.
Refer to the Technical Data and Service Manual of the current Model CJ 110MV for the following:
action
CJ 110MV / List No. E511
-2-