PESA Switching Systems, Inc., (PESA) warrants this equipment against defective workmanship or materials for a period of one (1) year from date of shipment. The sole warranty responsibility of PESA, shall be to replace or repair product proved to be defective. During the warranty period, defective parts will be replaced at no charge.
Page 3
180ft (60m) in HDTV 1080p format via single coaxial cable. The PRO-HDMI-BNC is easy to install and works perfectly with Belden 1694A coaxial cable. Other coaxial cables can also work with the PRO-HDMI-BNC and the transmission distance depends upon the quality and bandwidth of coaxial cables.
LED: Yellow light refers to video in Full HD mode while orange light refers to SD or HD mode. Output Panel +5V DC HDMI SETTINGS P/N PRO-HDMI-BNC-TX COAX OUT COAX OUT: Connect a coaxial cable and link it to the COAX IN port on the receiving unit PRO-HDMI-BNC-RX. ~ 3 ~...
Receiving unit PRO-HDMI-BNC-RX Input Panel +5V DC HDMI P/N PRO-HDMI-BNC-RX COAX IN COAX IN: Connect a coaxial cable and link it to the COAX OUT port on the transmitting unit PRO-HDMI-BNC-TX. Output Panel HDMI OUT: Connect to a HDMI display or projector with a HDMI male-male cable.
Cable HDMI Cable NOTICE 1. Since PRO-HDMI-BNC is sensitive to the HDMI source’s input jitters, the input HDMI signals with larger jitters will shorten the transmission distance significantly, especially at full HD 1080p60 mode. 2. All HDMI over coaxial transmission distances are measured using Belden 1694A coaxial cable and ASTRODESIGN Video Signal Generator VG-859C.
Page 8
PRO-HDMI-BNC HDMI over Single Coaxial Extender PESA Switching Systems, Inc. 103 Quality Circle, Suite 210 Huntsville, Alabama 35806 Tel: +1 (256) 726-9222 Fax: +1 (256) 726-9268 Email: service@pesa.com...