3.
Remove the belt guards by removing the self-tapping
screws that fasten them to the deck. See Fig. 7-6.
4.
Remove the deck belt from around the two spindle pulleys
and the two deck idler pulleys.
NOTE: The idler pulleys may have to be loosened, but not
removed, in order to remove the belt from around them.
5.
Route the new belt as shown in Fig. 7-7.
6.
Retighten idler pulleys, if loosened earlier.
7.
Remount the belt guards removed earlier
28
s
7— s
ectiOn
ervice
Figure 7-7