Uniden UWG 400 Owner's Manual page 14

#
The time is in 24-hour format and the date is in YYYY-MM-DD format.
#
When you replace the batteries, you will need to set the time and date
again.
key Tone
When you press a key on the Receiver, it is accompanied with a key tone.
1. Press MENU to display the menu.
2. Press the relevant Up and Down navigation keys to select Key Tone and
then press MENU to confirm the selection.
3. Press the relevant Up or Down navigation keys to choose between On
and Off to enable or disbale the function.
4. Press MENU to save the setting and return to the previous menu.
Snap Setting (Snapshot)
This option allows the Receiver to automatically take a photo when it
receives a call.
1. Press MENU to display the menu.
2. Press the relevant Up and Down navigation keys to select Snap Set and
then press MENU to confirm the selection.
3. Press the relevant Up or Down navigation keys to choose between On
and Off to enable or disable the function.
4. Press MENU to save the setting and return to the previous menu.
#
You can use the Camera button to manually take snaps.
#
The Receiver takes a maximum of 50 photos, deleting the older snaps
as the internal memory fills up.
Snap Show
The images (snap shots) will be stored in this menu. You can save or
delete them. On the top left corner of the image, the number of the
corresponding Camera will display.
1. Press MENU to display the menu.
2. Press the relevant Up and Down navigation keys to select Snap Show
and then press MENU to confirm the selection.
3. Press the relevant Right or Left navigation keys to browse through the
images.
14