Starting The Engine - Honda BF5A Owner's Manual

5. STARTING THE ENGINE
Fuel Line Connection
CAUTION: To prevent damage to the outboard from overheating, never
run the engine with the propeller out of the water.
1. Connect the fuel line to the tank and outboard motor, as shown. Be sure
the connectors are securely latched.
NOTE:
l
Position the fuel tank so the tank fuel line connector is no more than 1
meter (3.3 ft) below the motor fuel line connector.
l
Do.not place the fuel tank more than 2 meters (6.6 ft) away from the
motor.
l
Be sure that the fuel line is not kinked:
FEMALE FUEL LINE CONNECTOR
MALE FUEL LINE CONNECTOR
- TO FUEL TANK
2. Open the fuel cap vent knob 2 to 3 turns.
3. Squeeze and release the primer bulb until it feels firm, indicating that
fuel has reached the motor. Check for leaks.
m
Be careful not to spill any fuel. Spilled fuel or fuel vapor may ig-
nite. If any fuel is spilled, make sure the area is dry before starting the
engine.
NOTE: It is not necessary to use the primer bulb while the engine is
running.
VENT KNOB
13