Running; Running Scene; Running Chase - Net.Do TG24 User Manual

Net.DO
Lighting Control Equipment Co.,Ltd
4. Push PRESET Fader to change the value of channel;
5. Repeat Step 3~4 to edit next Chase-step;
6. Press PROGRAM key to quit. (Or repeat Step 2~4 to edit another Chase.)
Tips:
Press the DELETE key to delete Chase-step.
Use
Press INSERT(+) key to add Chase-step.
If the Chase-step is the last, it displays *.
(Eg: 10 is the last Chase-step, the LCD will displays *10)

4.3 Running

Push the SUBMASTER Fader on to Running relevant scene and chase.

4.3.1 RUNNING SCENE

If the SUBMASTER is not recorded, LCD displays:

4.3.2 RUNNING CHASE

When Chase Running, LCD displays:
Eg: Running the 10th Chase of Page 8.
1. Press PAGE key to turn to Page 8;
2. Push the SUBMASTER Fader 10 to running Chase 10.
Tips:
Press the Submaster key to flash-running the Scene or Chase.
Press the Submaster key or push the Submaster fader to convert the Chase to the
TG24/48 LIGHTING CONTROLLER
STEP key to select Chase-step.
PLAYBACK:
Scene........
PLAYBACK:
***
CHASE:
[ auto ]
Trigger mode
(8.01)
(8.01)
Chase number
(8.10)
[ > ] 1#
Direction Current Step
http://www.netdo.com.cn
PAGE: 9