Key; Introduction To Back Board Port - Net.Do TG24 User Manual

Net.DO
Lighting Control Equipment Co.,Ltd
MASTER FADER (A total of 3 master fader)
1. Playback Master Fader
2. Preset Master Fader
3. Grand Fader

3.3 Key

MODE Key --- Trigger mode of chase.
The chase has 2 trigger mode.
Auto: The speed of chase is controlled by SPEED%
and CROSS%.
Music: The chase running with music.
Press the MODE key continuously and the chase mode will be changed as
circulation.
PROGRAM Key
Press this key to enter programming state, The LED flash.
Press the Key again to exit programming state.
INSERT(+), DELETE Key
In programming mode, the two keys can be used to achieve CHASE-STEP increase,
insert, delete operations.
STEP Key
In chase operation, use this key to change the chase direction.
In the programming state, is used to select Chase-step.

3.4 Introduction to back board port

The controller adopts two DMX512 output modules with optical isolated and the
same output.
The audio input socket is 1/4" monophonic socket, with input line level 0dB. When
audio device is plug in, the audio source is line level input. When there nothing plug
in, the audio source is MIC selection.
TG24/48 LIGHTING CONTROLLER
AC Power Input
http://www.netdo.com.cn
DMX512 Output Audio Input
PAGE: 7