Automatic Transmission; Manual Transmission; Starting The Engine - BMW 2 SERIES COUPE Owner's Manual

Bmw 2 series coupe
Hide thumbs Also See for 2 SERIES COUPE:
Table of Contents

Advertisement

Controls
When the ignition is switched off, by opening
or closing the driver's door or unbuckling the
driver's seat belt, the radio ready state remains
active.
Radio ready state
Activate radio ready state:
When the engine is running: press the
Start/Stop button.
Some electronic systems/power consumers
remain ready for operation.
The radio ready state switches off automati‐
cally:
After approx. 8 minutes.
When the vehicle is locked using the cen‐
tral locking system.
Shortly before the battery is discharged
completely, so that the engine can still be
started.

Starting the engine

Hints
Enclosed areas
Do not let the engine run in enclosed
areas, since breathing in exhaust fumes may
lead to loss of consciousness and death. The
exhaust gases contain carbon monoxide, an
odorless and colorless, but highly toxic gas.◀
Unattended vehicle
Do not leave the vehicle unattended with
the engine running; doing so poses a risk of
danger.
Before leaving the vehicle with the engine run‐
ning, set the parking brake and place the trans‐
mission in selector lever position P or neutral
to prevent the vehicle from moving.◀
64
Driving
Online Edition for Part no. 01 40 2 924 974 - X/13
Repeated starting in quick succession
Avoid repeated unsuccessful attempts to
start the vehicle or starting the vehicle several
times in quick succession. Otherwise, the fuel
is not burned or is inadequately burned, posing
a risk of overheating and damage to the cata‐
lytic converter.◀
Do not wait for the engine to warm-up while
the vehicle remains stationary. Start driving at
moderate engine speeds.

Automatic transmission

Starting the engine
1.
Depress the brake pedal.
2.
Press the Start/Stop button.
The ignition is activated automatically for a
certain time and is stopped as soon as the en‐
gine starts.

Manual transmission

Starting the engine
1.
Depress the brake pedal.
2.
Press on the clutch pedal and shift to neu‐
tral.
3.
Press the Start/Stop button.
The ignition is activated automatically for a
certain time and is stopped as soon as the en‐
gine starts.
Engine stop
Hints
Take the remote control with you
Take the remote control with you when
leaving the vehicle so that children, for exam‐
ple, cannot start the engine.◀

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents