Bulb Replacement - BMW 2 SERIES COUPE Owner's Manual

Mobility
Carefully raise the wheel house panel, ar‐
row 2.
2. Pull off the bulb connector, arrow 1.
Turn the bulb, arrow 2.
Left side of vehicle: turn clockwise.
Right side of vehicle: turn counterclock‐
wise.
Remove the bulb.
3. Insert the new bulb, connect the connector
and screw on the wheel house panel.
Turn signal in exterior mirror
Follow the general instructions on lamps and
bulbs, refer to page 183.
The turn signals in the exterior mirrors feature
LED technology. Contact your service center
in the event of a malfunction.
188
Replacing components
Online Edition for Part no. 01 40 2 924 974 - X/13
Tail lamps, bulb replacement
At a glance
1 Turn signal
2 Top brake lamp
3 Reversing lamp
4 Tail lamp
5 Bottom brake lamps

Bulb replacement

Follow the general instructions on lamps and
bulbs, refer to page 183.
Turn signal, brake, tail, rear or reversing lamp:
21-watt bulb, P21W
Rear fog lamp: 6-watt bulb, H6W.
Removing the tail lamp
1. Open trunk lid.
2. Open the two covers on the tail lamp.
3. With the handle of the screwdriver from the
onboard vehicle tool kit, loosen and re‐
move the nuts on the two fasteners. Make
sure that the nuts do not drop into the