Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Barefoot Sound MiniMain12
Summary of Contents for Barefoot Sound MiniMain12
- Page 1 Owner’s Manual...
-
Page 3: Table Of Contents
Contents page Warnings! (please read carefully) Description Startup Inputs and Controls Signal Flow Diagram Protection Positioning Voice Emulation Force Cancelation Specifications Maintenance Drawings Warranty Handle Attachment... -
Page 4: Warnings! (Please Read Carefully)
Warnings! Mains Voltage Select switch (VAC Select) on the rear panel must be in the 230V position for AC power line voltages over 132 VAC. Connecting the power cord to AC power line voltages over 132 VAC while the VAC Select switch is in the 115V position will damage the amplifier. Such damage is NOT covered under warranty. -
Page 5: Description
1. Description The MiniMain12 is a four-way active loudspeaker capable of nearfield, mid-field and far-field operation. The seven drive units are all housed in sealed enclosures. The DSP controlled four-way power amplifier module can deliver 1200 Watts continuously. The system accepts either analog or 24 bit/192 kHz digital audio signals. -
Page 6: Inputs And Controls
The analog signal is converted to 24bit/192kHz digital audio via a preci- sion, ultra-high-fidelity analog to digital converter section inside the MiniMain12. 3. [AES3] XLR connector is designed to receive digital AES3 standard audio signal from sources such as sound cards and digital audio workstations. -
Page 8: Protection
6. Positioning The acoustic center of the MiniMain12 is located at the center of the tweeter. The MM12 is designed to work equally well as a nearfield, mid-field or far-field monitor. The minimum recommended listening distance is 1 meter (39.4”). - Page 9 Symmetrical stereo arrangements. Cooling While the Hypex amplifier modules that drive the MiniMain12 are a very efficient, the speaker still generates a significant amount of heat that must be dissipated. This heat is transmitted to the air via the rear amplifier plate, heat sink and the driver cones.
-
Page 10: Voice Emulation
7. Voice Emulation With the MM12, you can box up your secondary reference monitors for good. Despite the advantages of high- resolution monitors, many engineers still rely on their NS-10s and Auratones as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix. -
Page 11: Force Cancelation
This effect is most especially prevalent in the low frequency drivers where the cone motion is greatest. While, the MiniMain12 is built with a massive and well braced cabinet, we also tackle the problem at its source by eliminating vibrations before they even begin. -
Page 12: Specifications
8. Specifications Analog Input XLR female, Pin 1 ground, Pin 2 positive, Pin 3 negative Input Impedance = 100k Ohms Input Sensitivity (1m) = 90 dB @ -18 dBV (pass band) Analog to Digital Word Length: 24 bit Conversion Sample Rate: 192 kHz Oversampling = 128x Signal/Noise ≥... -
Page 13: Maintenance
Repairs, maintenance, or other servicing of this product when its interior compartment is exposed should only be performed under specific advice of Barefoot Sound by a qualified technician or by the Barefoot Service Center. There are no user-serviceable parts inside this product. -
Page 16: Warranty
Products should be returned suitably packaged to protect from shipping damage, or in their original packaging. Barefoot Sound shall be the sole and final authority to determine the validity of all warranty issues. All non-warranty repairs for current products will be charged according to the service repair pricing schedule. - Page 18 Barefoot Sound LLC http://barefootsound.com 2013...
Need help?
Do you have a question about the MiniMain12 and is the answer not in the manual?
Questions and answers