1. Manuals
  2. Brands
  3. Barefoot Sound Manuals
  4. Speakers
  5. MicroMain35 Gen2
  6. Owner's manual

Barefoot Sound MicroMain35 Gen2 Owner's Manual

3-way active loudspeaker
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MicroMain35 Gen2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Barefoot Sound MicroMain35 Gen2

Summary of Contents for Barefoot Sound MicroMain35 Gen2

  • Page 1 Owner’s Manual...

  • Page 2: Table Of Contents

    Warranty 1. Description The MicroMain35 Gen2 is a 3-way active loudspeaker capable of nearfield, and mid-field operation. The four drive units are all housed in sealed enclosures. The DSP controlled three-way power amplifier module can deliver 350 Watts continuously. The system accepts either analog or 24 bit/192 kHz digital audio signals. Cutting edge MEME™...

  • Page 3: Warnings! (Please Read Carefully)

    Mains Voltage Select switch (VAC Select) on the rear panel must be in the 230V position for AC power line voltages over 132 VAC. Connecting the power cord to AC power line voltages over 132 VAC while the VAC Select switch is in the 115V position will damage the amplifier. Such damage is NOT covered under warranty.

  • Page 4: Inputs And Controls

    The analog signal is converted to 24bit/192kHz digital audio via a preci- sion, ultra-high-fidelity analog to digital converter section inside the MicroMain35 Gen2. 3. [AES3] XLR connector is designed to receive digital AES3 standard audio signal from sources such as sound cards and digital audio workstations (DAW).

  • Page 5: Connections

    4. Connections Analog: Digital: Analog Source AES3 Source AES/EBU Splitter * See Section 9 for Voice connection details. 5. Startup 1. Verify that the AC Voltage select switch on the rear panel is in the correct position for the AC voltage in your facility (see warnings on pervious page for details) then plug in grounded mains power cable.

  • Page 7: Protection

    8. Positioning The acoustic center of the MicroMain35 Gen2 is located at the center of the tweeter. The MM35 Gen2 is designed to work equally well as a nearfield or mid-field monitor. The minimum recommended listening distance is 1 meter (39.4”).
  • Page 8 Symmetrical stereo arrangements. Cooling While the Hypex amplifier modules that drive the MicroMain35 Gen2 are a very efficient, the speaker still generates a significant amount of heat that must be dissipated. This heat is transmitted to the air via the rear amplifier plate, heat sink and the subwoofer cones.

  • Page 9: Meme™ Voicing

    9. MEME™ (Multi Emphasis Monitor Emulation) With the MM35 GEN2, you can box up your secondary reference monitors for good. Despite the advantages of high-resolution monitors, many engineers still rely on their NS10s and mix cubes as secondary references. These speakers have long traditions and people find them familiar and useful for focusing in on certain aspects of their mix.

  • Page 10: Force Cancelation

    This effect is most especially prevalent in the low frequency drivers where the cone motion is greatest. While, the MicroMain35 Gen2 is built with a massive and well braced cabinet, we also tackle the problem at its source by eliminating vibrations before they even begin.

  • Page 11: Maintenance

    Repairs, maintenance, or other servicing of this product when its interior compartment is exposed should only be performed under specific advice from Barefoot Sound by a qualified technician or by the Barefoot Service Center. There are no user-serviceable parts inside this product.

  • Page 13: Frequency Response

    14. Specifications Analog Input XLR female, Pin 1 ground, Pin 2 positive, Pin 3 negative Input Impedance = 100k Ohms Input Sensitivity (1m) = 90 dB @ -18 dBV (pass band) Analog to Digital Word Length: 24 bit Conversion Sample Rate: 192 kHz Oversampling = 128x Signal/Noise ≥...

  • Page 15: Warranty

    Products should be returned suitably packaged to protect from shipping damage, or in their original packaging. Barefoot Sound shall be the sole and final authority to determine the validity of all warranty issues. All non-warranty repairs for current products will be charged according to the service repair pricing schedule.
  • Page 17 Barefoot Sound LLC http://barefootsound.com 2013...

Table of Contents