Safety Precautions - Audiovox KCD3180 Instruction Manual

Undercabinet kitchen cd clock radio
Table of Contents

Advertisement

SAFETY PRECAUTIONS

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
WARNING: SHOCK HAZARD - DO NOT OPEN
AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
The lightning flash with an arrowhead symbol, within the equilateral triangle,
is intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to cause an
electric shock.
The exclamation point within the equilateral triangle intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in this owner manual.
ON SAFETY
• Before operating, make sure the voltage requirement of the unit matches your local
voltage.
• Disconnect the plug as soon as immediately unplug the unit if liquid spills into or onto
the unit, or if an object enters the unit. The unit should not be used until being checked
by experts.
• Do not open the cabinet. Lasers used in rays employed by the unit may damage your
eyes. Any servicing should be done by qualified service personnel.
• When you are not going to use the unit for a long period of time, disconnect the power
cord.
ON PLACEMENT
• Do not leave, mount or use the unit in places which are extremely hot, cold, dusty, or
humid.
• Allow adequate air circulation to prevent internal heat build-up. Do not place the unit
on a surface or near materials (a curtain ex. rugs, blankets, curtains, etc.) which might
block the ventilation holes.
ON CONDENSATION
• When left in a heated room where it is warm and damp, water droplets or condensation
may form inside the CD player. When there is condensation inside the unit, the unit may
not function normally. Let it stand for 1 to 2 hours before turning the power on, or
gradually heat the room up and dry the unit before use.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
The symbol for Class II
(Double Insulation)
- 1 -
This
product
contains a low power
laser device.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents