Table of Contents
Advertisement
1.
Specialist personnel
04.02
Specialist personnel are persons with a specialist education in the fields of electrics,
electronics and mechanics. They are responsible for the lubrication, maintenance, repair and
adjustment of the machine.
The specialist personnel is obliged to observe the following points and must:
always observe the Notes on Safety in the Instruction Manual!
switch off the On/Off switch before carrying out adjustments or repairs and ensure that
it cannot be switched on again unintentionally!
never work on parts which are still connected to the power supply. Exceptions are
contained in the regulations EN 50110.
when servicing or carrying out repairs on pneumatic devices, remove the machine from
the compressed air supply. The only exceptions to this are function checks.
replace the protective coverings and close the electrical control box after all repairs or
maintenance work!
Warning
1.
05
While sewing keep your hands away from the needle area!
Danger of injury by the needle!
When making adjustments do not leave any objects on the tabletop or
in the needle plate area! Objects could become clamped or slung away!
Danger of injury!
To adjust this unit the machine must be tipped to the back!
Use both hands when setting the machine upright! Danger of clamping
between machine and tabletop!
Adjustment
Safety
5
Hide quick links:
Advertisement
Table of Contents
