Factory Setting; How To Turn On The Factory Setting; How To Replace The Lithium Battery 11.2. What Is The Factory Settings - Panasonic SDR-S50P Service Manual

11 Factory Setting

11.1. How to turn on the factory setting?

1. Indication method of the service menu
Set the mode switch "
2. While keep pressing the "Intelligent auto/Manual" button and "Menu" button, hold left the Zoom Lever towards to "[ W ]" posi-
tion for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Under the condition of the Item No."1" is yellow high lighted, press the "[RIGHT
4. By pressing the "[UP
5. After few seconds "END" is displayed on LCD monitor.Cutting of battery connection or AC power supply connection as a com-
pletion of the "FACTORY SETTINGS".
11.2. What is the factory settings?
The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Clear the date.
7. Initialize the VIERA Link Physical Address.
The setting position of factory settings:
Name
Mode switch
Open/close switch
Recording" mode.
] of joystick" button, then press the "[center] of joystick" button.
Setting position
] of joystick" button.
35