Dodge 2014 Dart User Manual page 56

ELECTRONICS
USB Port
• Connect your MP3 Player or compatible
device using a USB cable into the USB
Port. USB Memory sticks with audio files
can also be used. Then, audio from the
device can be played on the vehicles
sound system while providing metadata
(artist, track title, album, etc.) information
on the radio display.
• When connected, the MP3 Player/
compatible USB device can be controlled
using the radio or Steering Wheel Audio
Controls to play, skip to the next or previ-
ous track, browse, and list the contents.
• The MP3 Player battery charges when
plugged into the USB port (if supported by
the specific device).
• To route the audio cable out of the center console, use the access cut out on the right
side of the console.
NOTE:
When connecting your MP3 Player device for
the first time, the system may take several
minutes to read your music, depending on the
number of files. For example, the system will
take approximately five minutes for every
1000 songs loaded on the device. Also during
the reading process, the Shuffle and Browse
functions will be disabled. This process is
needed to ensure the full use of your MP3
Player features and only happens the first
time it is connected. After the first time, the
reading process of your MP3 Player will take
considerably less time unless changes are
made or new songs are added to the playlist.
• The USB port supports certain Mini, Classic, Nano, Touch, and iPhone® devices. The USB
port also supports playing music from compatible external USB Mass Storage Class
memory devices. Some iPod® software versions may not fully support the USB port
features. Please visit Apple's website for iPod® software updates.
Audio Jack
• The Audio Jack allows a portable device, such as an MP3 player or an iPod® to be plugged
into the radio and utilize the vehicle's sound system, using a standard 3.5 mm audio
cable, to amplify the source and play through the vehicle speakers.
54