SonicWALL TZ 100 Series Getting Started Manual page 34

To add the components of a One-to-One NAT policy, perform
the following steps:
1. Navigate to the Network > Address Objects Page and
choose the Custom radio button.
2. Click the Add button; define a network address object
(example named 'webserver 10.33.4.101' ; a LAN host
object w/ IP address 10.33.4.101)
3. Navigate to the Network > NAT Policies page. Click Add.
The Add NAT Policy dialog box displays.
4. For Original Source, select Any.
5. For Translated Source, select Original.
6. For Original Destination, select WAN Primary IP.
7. For Translated Destination, select 'webserver
10.33.4.101'
8. For Original Service, select HTTP.
9. For Translated Service, select Original.
10. For Inbound Interface, select X1.
11. For Outbound Interface, select Any.
12. For Comment, enter a short description.
13. Select the Enable NAT Policy checkbox.
14. Select the Create a reflexive policy checkbox if you want
a matching NAT policy to be automatically created in the
opposite direction. This will create the outbound as well as
the inbound NAT Policy.
For more information on creating NAT policies, refer to the
SonicOS Enhanced Administrator's Guide.
SonicWALL TZ 100/200 Series Getting Started Guide Page 31