Whirlpool SM988PEP Use & Care Manual page 16

Setting the Controls for Self-Cleaning
Be sure the kitchen is ventilated during the Self-Cleaning cycle. This will help
remove heat and odors that are normal during the cycle.
1.
Turn the Set Time Knob until the
Start and Stop Time Dials show the
right time of Dav.
3. Set the Oven Selector to CLEAN
The Oven Temperature Control
must be in the OFF position.
5. After the Clean Cycle is
completed and the oven tem-
perature has dropped below
500°F (260X), the Lock Lever can
be moved back to the COOK
Position. Do not force it. Wait until
it will move easily. Turn the Oven
,6 Selector to OFF
2. Push in the Stop Time Knob and
turn the hand clockwise 2-2'/2
hours.
l
Use 2 hours for light soil.
l
Use 21% hours for moderate to
heavy soil.
I
4. Move the Lock Lever to the CLEAN
position. This will start the Self-
Cleaning Cycle. If the door is not
completely closed or the lever
IS
not all the way to the right, the
cycle will not start
When the oven temperature
exceeds normal baking tem-
peratures, the oven door can't
be opened and the Lock Lever
must not be moved.
6. After the oven is cool, wipe off
any residue or ash with a damp
cloth. If needed, touch up spots
with cleaner or plastic scouring
pad.