SAFETY To ensure proper use of this product, please read this owner manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location. Page 1...
IMPORTANT SAFETY INSTRUCTIONS CAUTION: RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following proce- dures for installation, use and servicing.
CONTENT Safety ____________________________________________________________________ 1 Important Safety Instructions __________________________________________________ 2 Contents & Package ________________________________________________________ 3 Installation ________________________________________________________________ 4 Remote Control ____________________________________________________________ 5 Front Panel ________________________________________________________________ 6 Rear Panel ________________________________________________________________ 6 Connections _______________________________________________________________ 7 Basic Operation ____________________________________________________________ 9 Playing DVD/CD/VCD Disc __________________________________________________ 12 Example shows how to Create Program and Delete Selection for DVD ________________ 16 Playing MP3 Disc __________________________________________________________ 18 Playing Picture (JPEG) CDs _________________________________________________ 21...
Player Zones For the purpose of distribution of DVD Discs, the world has been separated into 6 zones. The zone your unit is intended for is indicated on the Zone Label. This should be the same as the label on discs available in your region. If you have any difficulties in playing a disc, make sure that the disc is for the same zone as your player.
REMOTE CONTROL switches the player between Standby and On. SKIP changes to next disc tray. INFO enters and exits Active Navigation mode. CLEAR exits menus and Active Navigation mode. displays angle menu if present on discs. MENU displays setup menu when stopped and disc menu when playing.
FRONT PANEL 1. Standby indicator 2. Turns unit on/off 3. Starts playing 4. Pauses playing 5. Stops playing 6. Skips to previous chapter/track 7. Skips to next chapter/track 8. Discs loading tray 9. Select disc tray directly and start playing disc on respective disc tray.
CONNECTIONS Video Connections The way in which you connect your DVD player and the kinds of cabling you choose can make a noticeable differ- ence in picture and sound quality. Before you select one of the options, please make sure that your other equip- ment (e.g.
Audio Connections Before you select one of the options, please make sure that your other equipment (e.g. TV, receiver) has the required input/output channel. Use either options of below: For better sound quality, use RCA AUDIO CABLE RCA AUDIO CABLE RCA AUDIO CABLE DVD PLAYER DVD PLAYER...
BASIC OPERATION To access the setup menu the unit must be in STOP mode.Use Active Navigation keys to make selections and then press OK to confirm. 1. Play Press OK to list the content of disc (No menu available without disc loaded.) 2.
Page 11
3.3 Rated Titles (continue) If alternative scenes with lower rating are included, Parental Level 7 Parental Level 5 Parental Level 5 Parental Level 7 the player plays the highest rated scene that the parental setting allows. For example, consider a disc Playback Path Parental Level 5 which is generally suitable for most audiences, and is...
Page 12
4.2 PAL/NTSC Press OK to select PAL or NTSC output to match your TV or other video equipment. 5. Sound Sound Use Active Navigation keys to select a sub-menu Digital Output 5.1 Dynamic Range Compression (DRC) Press OK to turn on/off. Note: This controls the Dynamic Range Compression (DRC) for night time listening.
PLAYING DVD/CD/VCD DISC You can load at maximum 5 discs in the unit for playing. 1. Press to open discs loading tray. 2. Load disc (DVD, CD, MP3 Disc or Picture CD) on disc tray with label side facing upward. 3.
During Playback Pause / Freeze Press to temporarily hold the playback. Press repeatedly to switch between Pause and Freeze. Slow Motion / Frame-by-Frame Advance In “pause” mode, press to start forward or backward slow motion play. In “Freeze” mode, press to move forward or backward frame by frame.
Page 15
Numeric keys (0-9) Press to input track number for direct track selection. Zoom Press to zoom in (2x, 3x, 4x and 5x) pictures during disc playback. Info Banner 1 of 1 PLAY T : 01 T : 01 C : 12 00:33:10 T : 01 C : 12...
Page 16
on Remote Control) Index Menu Press OK to enter Index mode. Index menu will be displayed on top of screen. Press OK during playing to set any scene as indexed. You can set at maximum 6 indexes on a disc. To play/cancel indexes, use Active Navigation keys to select (Play) or...
Example shows how to create program for DVD Use Active Navigation keys to make selections Step 1: Select Disc “2” and move to “Title” Step 2: Select Title “2” and move to “Chapter” Step 3: Select Chapter “2” Step 4: Select and confirm “Add”...
CONTROLS (MP3 / JPEG DISC) 1. Open / Close • Press to open the tray Note: Load disc on the tray with label facing upward. • Press to close the tray and play automatically 2. Play SKIP • Press to start playing 3.
Page 20
PLAYING MP3 DISC Pause Press to stop playing temporarily. Press again to resume playing. Skip Press to skip forward or backward a track. Stop Press once to stop playing. Track Selection You can browse through disc menus and select tracks when the disc is playing.
Page 21
Album 1 Step 2: Select “Album 3” Album 2 Album 3 Album 4 Album 5 Album 6 Step 3: Select “Track 3” and start Play Track 1 Track 2 Track 3 Track 4 Track 5 Track 6 About Making an MP3 Disc Precaution should be taken when you create your own MP3 CD The MP3 Player supports only ISO9660 standard (level...
Page 22
Step 2: Click on “CD Layout Properties” Step 3: Choose ISO9660, Click OK. ISO9660 format is set for burning! Page 21...
PLAYING PICTURE (JPEG) CDS NOTE: Each JPEG (or JPG) picture to be played should not be over 10 million pixel in size. Other- wise, it will not be displayed. Quick 1. To play Picture CD, press to open the disc tray. Normal 2.
Album 1 Step 2: Select “Album 2” Album 2 Program Play Album 3 Album 4 Album 5 Album 6 Photo 1 Step 3: Select “Photo 3” Photo 2 Photo 3 Program Play Photo 4 Photo 5 Photo 6 When Picture CD is playing Pause, Skip forward and backward Press to freeze playing temporarily and then press...
DISC YOU CAN PLAY While advances have been made to ensure that your disc player is compatible with the largest number of discs possible, it cannot be guaranteed that you will be able to play discs which might not be compliant with audio CD standards.
PROBLEMS If it appears that your DVD-Video player is faulty, first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself; as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player.
Need help?
Do you have a question about the SX-013DVDR and is the answer not in the manual?
Questions and answers