Table of Contents
Advertisement
K
Beginner Use - Low Speed Drive
As assembled, your vehicle is ready to roll in low speed
(2
/
mph, maximum). It has been pre-set so it will only
1
2
operate in low speed. After your child has mastered the
basic skills of driving and understands the rules for safe
driving, it's time to remove the high speed lock-out screw to
allow the vehicle to operate in low or high speed.
See the instructions on page 22 to remove the high
speed lock-out screw.
• Make sure the shifter is in the low speed
• Press down on the foot pedal
at a maximum of 2
/
mph
1
2
• Help your child practice steering to learn how far and how
quickly to turn the steering wheel when driving
forward in low speed.
To Stop
• Your vehicle has a patented electronic braking system
that automatically stops the vehicle when your child's foot
is lifted from the pedal.
• Make sure your child is comfortable with steering the
vehicle and automatically knows how to stop.
How to Operate Your Vehicle
position
. The vehicle goes forward
.
Note: To avoid damaging the motors and gears, stop the
vehicle before shifting from forward to reverse
• Once your child is completely comfortable with operating
the vehicle in the forward mode, introduce reverse
To Back Up
• Make sure the shifter is in the reverse
• Press down on the foot pedal
reverse at a maximum of 2
.
designed to operate in low speed only in reverse.
• Help your child practice steering to learn how far and how
quickly to turn the steering wheel when driving in reverse.
21
To Back Up
position
.The vehicle will go in
1
/
mph
. The vehicle is
2
.
.
.
Advertisement
Table of Contents
