Table of Contents
Advertisement
3. OPERATING INSTRUCTIONS
3.1 GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of
the monitor. By changing these settings, the picture can be adjusted to your personal preferences.
The power cord should be connected.
-
Connect the video cable from the monitor to the video card.
-
-
Press the power button to turn on the monitor, the power indicator will light up.
3.2 OPERATING INSTRUCTIONS
NO.
1
Power Button
2
MENU Button
3
Left Arrow/- Button
4
Right Arrow/+ Button
5
Hot keys
Button
Left Arrow/- Button
Right Arrow/+ Button
Exit Button
1.Enter the OSD sub menu
2.Select the OSD menu
1.Move the cursor to left
2.Adjust down when menu
1.Move the cursor to left
2.Adjust down when menu
Exit Button
Function
To change the ECO mode and
MAX mode and User mode
To Adjust the Volume
To run the Auto Adjust
Within OSD
Turn on/off
item selected
item selected
1.Exit Sub menu
2. Exit the menu item
The item adjust the power consumption to
When Mute function is ON, if they change
6
BUFFALO Service Manual
Without OSD
Turn on/off
Open OSD menu
Open Bright menu
Open the Volume menu
Run the Auto Adjust when this
button keep to push for 1 second
Remark
change the luminance
the volume then mute function is off
When this button keep to push for 1
seconds
Advertisement
Table of Contents
