Back Panel Description - Cisco WebSTAR DPX100 User Manual

WebSTAR Cable Modem User's Guide Models DPX100, DPX120, DPX2100, and EPX2100

Back Panel Description

The following illustration describes the back panel components of the cable modem. The illustration and
descriptions apply to the Model DPX100/120 Cable Modems along with Model DPX2100 and Model EPX2100
Cable Modems.
8
1. POWER—Connects the cable modem to the DC output of the
AC power adapter that is provided with your cable modem.
Only use the AC power adapter and power cord that is
provided with your cable modem
2. RESET—Reset-to-Default button (Factory Reset)
This button is for maintenance purposes only.
Do not use.
3. ETHERNET—RJ-45 Ethernet port connects to the Ethernet
port on your PC
4. USB—12 Mbps USB port connects to the USB port on your
PC
5. CABLE IN—F-Connector connects to an active cable signal
from your cable service provider