Table of Contents
Advertisement
5
4. Updating the version of the firmware
• Click on " Load File... " (6), and select " PL3507-0310B-pioneer.hex " (7) Then click on "Update " (8)
Note: Do NOT forcibly terminate the program before writing is finished.
If you do, the file in the EEPROM will be destroyed and cannot be restored.
6
8
7
Once "Update OK!" is displayed, the procedure is finished.
• Disconnect the interface (USB cable) from the PC then turn off the power of the main unit.
Reconnect the interface to the PC and turn on the main unit. Start up this program and check that the version number
has been updated on the F/W (firmware) Ver. display.
5
6
.hex
DVR-S806
6
7
(as of Septenber. 2004)
7
7
8
A
B
C
D
E
F
23
8
Advertisement
Table of Contents
