Troubleshooting (Advanced); Shut Down - Panasonic CF-H1 Series Reference Manual

Troubleshooting (Advanced)

Refer to the following instructions when a problem occurs. If the remedies indicated in the chart do not solve the problem,
contact Panasonic Technical Support. For a software problem, refer to the instruction manual of the software.
• To check the computer's usage status (

Shut Down

Cannot shut down or restart Windows.
Standby or Hibernation
Cannot enter standby or hibernation.
Cannot enter standby or hibernation
automatically.
Sound
No sound.
Distorted sound.
"There was an error updating the reg-
istry" appears when Sound Recorder
is started.
Keyboard
Cannot enter special characters (ß, à,
ç, etc.) and symbols.
page 76).
Remove USB devices.
It may take 1 or 2 minutes to shut down.
Remove USB devices temporarily. If the problem persists, restart the computer.
It may take 1 or 2 minutes to enter standby or hibernation.
The computer does not enter standby or hibernation immediately after
resuming. Wait approximately 1 minute.
Disconnect peripheral devices.
If you connect to a network using wireless LAN function, select the profile and
connect to the access point (
If you do not use wireless LAN function, turn off wireless LAN function (
46). If you use wireless LAN function, refer to "To enter sleep on hibernation"
( page 16) to enter sleep on hibernation.
Make sure that you are not using any software that regularly accesses the hard
disk. Check that the software which constantly access to the hard disk or place
burden on CPU are not used.
Click or on the notification area and change the volume.
Restart the computer.
Stop and restart playback.
Sound Recorder is started by a limited account user whose language setting is
not the same as the administrator user who last started Sound Recorder. This
does not affect the operation.
Use the character map. Click [start] - [All Programs] - [Accessories] - [System
Tools] - [Character Map].
page 50).
68
page