Connections - DVDO AVLab TPG User Manual

Connections

AVLab is normally connected in one of three ways:
1) Manual mode: This Is normally used for quick
display/projector setup to verify scaling,
geometry, focus, and basic brightness/contrast.
• Power can be supplied via USB cable from the
TV USB port (if available), from a standard
USB power supply, or a computer.
• HDMI out to the display/projector.
• Control using built in buttons and/or IR
remote control
DVDO AVLab TPG
DVDO AVLab TPG - 4K Test Pattern Generator
USB
6
HDMI
A.04