Table of Contents
Advertisement
MAINTENANCE
SPECIFICATIONS
The manufacturer reserves the right to vary specifications, design, or use alternative materials as may be deemed necessary
or desirable at any time, any such changes or variations being of a kind as not to reduce the quality, performance or appearance.
GENERAL
Power source;
AC 110 -127 V and 220 - 240 V, 50/60
Hz
DC 15V(UM/SUM-1 or R20 type x 10,
or external 15 V DC)
Output power:
PMPO; 200 W (100 W + 100 W) (AC
operation)
MPO; 40 W (20 W + 20 W) (AC opera-
tion)
RMS; 26 W (13 W + 13 W) (DC oper-
ation, 10% distortion)
Input impedance:
External mic; 600 ohms
Phono/line in/CD; 50 kohms
Loaded impedance:
Headphones; 8 - 3 2 ohms
External speakers; 8 - 1 6 ohms
Line out; 0.6 V/50 kohms
Width; 680 mm
Dimensions:
Height; 250 mm
Depth; 180 mm
9.3 kg without batteries
Weight:
TAPE RECORDER
Compact cassette tape
Tape:
Frequency response:
30 - 1 5,000 Hz (normal tape)
30 - 16,000 Hz (CrO2 tape)
30 - 17,000 Hz (metal tape)
55 dB (Tape 1, playback)
Signal/noise ratio:
50 dB (Tape 2, recording)
• Internal care
• Dirty heads, capstans and pinch rollers cause poor sound
and tape jams. Clean these parts with cotton swab moistened
with commercial head/pinch roller cleaner or isopropyl alchohol.
• After long use, the deck's heads and capstans will become
magnetised, which causes poor sound. Demagnetise these
parts once every 30 hours of playing/recording time by using
commercial tape deck demagnetiser. Read demagnetiser's in-
structions carefully before using.
• External care
• Periodically wipe cabinet clean with soft cloth and dilute
soap solution, then wipe with dry cloth.
• Do not use chemically treated cleaning cloths or other chem-
icals. (See Cautions.)
RADIO
Frequency range:
MW; 526.5 - 1606.5 kHz
SW1; 2.3 - 7.3 MHz
SW2; 7.3 - 22 MHz
FM; 64 -74 MHz
SPEAKER
Speakers:
210 cm2 square-type flat diaphragm
woofer x 2
5 cm tweeter x 2
Super tweeter x 2
Impedance:
8 ohms
Input:
26 W (RMS)
100 W (PMPO)
Hide quick links:
Advertisement
Table of Contents
