Jensen VX7020 Operating Instructions Manual page 228

VX7020
Vehicle types:
Maneuver restrictions and directional constraints are taken into account when
planning a route.
Roads are used only if access for cars is allowed.
Private roads and resident-only roads are used only they are inevitable to reach
the destination.
Walkways are excluded from routes.
Neither maneuver restrictions nor directional constraints are taken into account
when planning a route.
Roads are used only if access for pedestrians is allowed.
Controlled-access roads are excluded from routes.
A private road is used only if the destination is there.
Speed limits are not used in route calculation and an average walking speed is
used when calculating the estimated time of arrival.
Maneuver restrictions and directional constraints (if they are applied to bicycles
in the map data) are taken into account when planning a route.
Roads are used only if access for bicycles or pedestrians is allowed.
Controlled-access roads are excluded from routes.
A private road is used only if the destination is there.
Speed limits are not used in route calculation and an average cycling speed is
used when calculating the estimated time of arrival.
iGO primo excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually
you cannot reach the speed limit on them.
Carpool or HOV lanes can be used if a given number
of passengers are traveling in the vehicle. You should
check whether you are allowed to use carpool lanes
before enabling this road type.
125